International Journal of Advanced Studies in Computer Engineering

MANAGING THE DEVELOPMENT OF MEASURES FOR THE INTRODUCTION OF ENERGY-SAVING TECHNOLOGIES IN ENERGY SUPPLY

A. F. Amirkhanova — 2024-06-30

This paper analyzes measures to improve energy efficiency and increase the share of energy-saving solutions. The method of managing energy saving processes is considered, and the essence of each stage of the considered technique is revealed.

SECURITY PROBLEMS OF MONITORING THE ENERGY SUPPLY SYSTEM

Z. A. Gilmutdinova — 2024-06-30

The article presents the main goals and functions of monitoring the energy supply system and notes its importance for maintaining effective operating modes of enterprises. The paper describes various safety problems of monitoring in heat supply and electricity supply systems.

APPLICATION OF INNOVATIVE TECHNOLOGIES TO IMPROVE ELECTRICAL SAFETY IN INDUSTRIAL ENTERPRISES

A. R. Gilmanov — 2024-06-30

The article discusses innovative technologies, the use of which makes it possible to increase the level of electrical safety in industrial enterprises. An analysis of existing problems in the field of electrical safety was carried out and promising directions for using new technologies to solve them were identified. The results of theoretical research and practical recommendations for the implementation of innovative approaches to the electrical safety management system at industrial facilities are presented.

MANAGEMENT SYSTEM FOR PROVIDING SERVICES FOR ELECTRICITY TRANSMISSION TO INDIVIDUALS CONSUMERS BASED ON PC 1C “ENERGOBILLING”

A. M. Manzullina — 2024-06-30

This article talks about the importance of introducing automation in making payments to electricity consumers, reducing personnel time costs and increasing the volume of productive supply in the Republic.

The research methodology used in the article is analysis of information on the Internet on a relevant topic, observation, comparison.

ENSURING ELECTRICAL SAFETY IN PUBLIC BUILDINGS

I. D. Khudiaev — 2024-06-30

Security is one of the market aspects of our lives. In modern society, where electricity plays a key role in many activities, ensuring electrical safety becomes an integral part of protecting people and damage from possible hazards. Particular attention is paid to public buildings, as they are high-traffic areas and pose a risk.

FEATURES OF LABOR SAFETY FOR MAN AND ADOLESCENTS

I. D. Khudiaev — 2024-06-30

Occupational safety is an important component of the successful functioning of any organization. However, issues of labor safety for women and adolescents require special attention and analysis. In this article we will look at the features associated with ensuring safe working conditions for women and young people.

PROSPECTS OF IT TECHNOLOGIES IN THE ELECTRIC POWER INDUSTRY

M. A. Kholkina — 2024-06-30

This article explores the prospects of using OTT technologies in the electric power sector, paying special attention to how they increase efficiency, improve the quality of customer service, as well as the problems associated with their integration.

THE ROLE OF THE HUMAN FACTOR IN ENSURING ELECTRICAL SAFETY IN PRODUCTION

K. E. Semyachkova — 2024-06-30

The article examines the role of the human factor in ensuring electrical safety in production. The main causes of accidents and accidents due to violations of electrical safety at work are described. The authors draw attention to the need for employees to comply with safety rules and instructions, as well as the importance of training and supervision by the company’s management.

PREVENTION OF AMBIGUOUS SITUATIONS WHEN IDENTIFYING THE LEVEL OF STUDENT ENGAGEMENT

S. I. Timakov — 2024-06-30

The article describes the importance of correctly identifying the level of student engagement and highlights the problem in its identification. The article also proposes a solution to this problem in the form of a two-factor algorithm that is being developed. Further the article describes the sets of attributes necessary for the use of the proposed algorithm.

ANALYSIS OF ACCIDENTS AT ELECTRICAL INSTALLATIONS OF CONSUMERS

O. N. Osadchaya — 2024-06-30

Accidents at electrical installations of consumers remain a serious problem with a high risk of death. This article discusses the accidents that occurred in organizations supervised by Rostechnadzor. The main reasons include technical flaws (outdated equipment, substandard wiring), the human factor (unskilled personnel, installation errors) and violations of operating rules (ignoring safety instructions). Accidents lead to tragic consequences for victims and significant damage to infrastructure. It is necessary to strengthen compliance with operating rules, train personnel, upgrade equipment and improve safety measures to prevent similar incidents in the future.

THE ROLE OF PROCESS AUTOMATION IN ENSURING INDUSTRIAL SAFETY

E. R. Kharisova — 2024-06-30

This article examines the importance of process automation to ensure safety at work. The possible hazards that may arise during technological processes are highlighted. It is noted that the automation of the technological process is able to ensure compliance with the specified parameters according to established technical standards, preventing overheating of devices, pressure increase and the formation of explosive substances. The automation system allows you to promptly inform the service personnel about possible threats, which helps to take the necessary measures to prevent fires and explosions at work.

MEASURES TO ENSURE ELECTRICAL SAFETY AT THE ENTERPRISE USING AUTOMATION

S. A. Prach — 2024-06-30

This article talks about methods and measures to ensure electrical safety at the enterprise by automating the technological process. The use of automation in the field of electrical safety plays an important role in improving the safety of personnel and equipment in production.

The research methodology used in the article is the analysis of information on the Internet, on the relevant topic, observation, comparison.

FEATURES OF THE POWER SUPPLY MANAGEMENT SYSTEM OF AN INDUSTRIAL ENTERPRISE IN THE CONTEXT OF INDUSTRY 4.0 AND INDUSTRY 5.0

L. Z. Safina — 2024-06-30

The article analyzes the features and challenges that arise when adapting energy management systems at industrial enterprises to the requirements of Industry 4.0 and Industry 5.0. The importance of introducing smart technologies, using data to optimize energy consumption and creating innovative systems for monitoring and controlling energy resources is considered.

SMART HOME BASED ON ARDUINO

T. A. Khabirov — 2024-06-30

The article discusses the creation of a smart home using the Arduino platform, analyzing its practical advantages and capabilities. Describes ways to save money, protect personal data, and integrate various devices into a single system. Various possibilities for expanding the functionality of a smart home based on Arduino are also discussed, such as creating niche crafts and integration with various communication protocols.

THE INTRODUCTION OF DIGITAL TECHNOLOGIES IN THE ENERGY SUPPLY OF ENTERPRISES

G. L. Shaekhova — 2024-06-30

This paper examines the integration of digital technologies into the energy supply of enterprises. Digital technologies that facilitate the processes of electricity production and distribution have been identified. The features of each concept under consideration are highlighted, which allows the enterprise to choose the necessary functionality for performing tasks or automatization of processes.

TYPES OF LIGHTNING EFFECTS ON OVERHEAD LINE INSULATION

O. V. Redikop — 2024-06-30

The article examines the influence of lightning on overhead power lines, describes various cases of lightning strikes and their consequences for equipment; The idea of the article is the need to effectively protect the electrical network and equipment from lightning discharges to ensure reliable and safe operation of power supply systems.

ORGANIZATION AND MANAGEMENT OF SAFETY ASSURANCE IN INDUSTRY WITH THE HELP OF MODERN TECHNOLOGIES AND EQUIPMENT

I. A. Salakhov — 2024-06-30

In the modern world, technology plays a key role in ensuring occupational safety in industry. With the development of innovations and the introduction of new technologies, companies strive to create working conditions that minimize risks for employees and ensure workplace safety. Technologies and specialized equipment are becoming an integral part of strategies to prevent occupational injuries and accidents.

AUTOMATED CONTROL AND MANAGEMENT SYSTEMS FOR ENSURING SAFETY IN WORKING CONDITIONS

D. A. Chekmarev — 2024-06-30

In this article, we will consider the basic principles of operation of automated control and management systems to ensure safety in working conditions, as well as their advantages and capabilities. This approach allows organizations to minimize risks for their employees, reduce the number of accidents in production, and increase overall work efficiency.

THE ROLE OF AUTOMATION IN ENSURING ELECTRICAL SAFETY AT INDUSTRIAL ENTERPRISES

Sh. R. Shaykhutdinov — 2024-06-30

The article considers the integration of automation and control systems with electrical safety systems, analyzes the advantages and possible problems, and offers solutions for their elimination.

SAFE OPERATION OF ELECTRICAL INSTALLATIONS. PROTECTION MEASURES AGAINST ELECTRIC SHOCK

A. V. Bogdanov — 2024-06-30

This article discusses the importance of ensuring safety when working with electricity. The main hazards in the operation of electrical installations are highlighted and safety measures in the operation of electrical installations are described. The importance of training and monitoring the implementation of safety rules has also been investigated.